300mm

300mm x 116Teeth  - Thin Kerf (Extra Fine Cut) For Wood & Plastics

300mm x 116Teeth - Thin Kerf (Extra Fine Cut) For Wood & Plastics

Kerf = 2.4mm Body = 1.6mm Tooth angle = 6 deg Tooth spacing = 8mm A fin..

£150.32 Inc VAT: £180.39

300mm x 116Teeth  - Thin Kerf (Extra Fine Cut) Triple Chip For Wood & Plastics

300mm x 116Teeth - Thin Kerf (Extra Fine Cut) Triple Chip For Wood & Plastics

Kerf = 2.4mm Body = 1.6mm Tooth angle = 6 deg Tooth spacing = 8mm A fin..

£150.32 Inc VAT: £180.39

300mm x 120Teeth - Thin kerf (2.8mm) for aluminium & plastics

300mm x 120Teeth - Thin kerf (2.8mm) for aluminium & plastics

Kerf = 2.8mm Body = 2.0mm Tooth angle = minus 2 deg Tooth spacing = 8mm ..

£159.95 Inc VAT: £191.94

300mm x 156Teeth - Thin kerf (2.8mm) for aluminium & plastics

300mm x 156Teeth - Thin kerf (2.8mm) for aluminium & plastics

Kerf = 2.8mm Body = 2.0mm Tooth angle = minus 2 deg Tooth spacing = 6mm ..

£198.56 Inc VAT: £238.27

300mm x 20+2Teeth - Multi Rip With Wiper Slots

300mm x 20+2Teeth - Multi Rip With Wiper Slots

KERF - 3.2mm BODY - 2.2mm TOOTH ANGLE - 22 deg pos TOOTH SPACING - 46mm ..

£99.37 Inc VAT: £119.24

300mm x 20Teeth  - Nail Resistant For Wood

300mm x 20Teeth - Nail Resistant For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = 2 deg negative Tooth spacing = 46mm ..

£60.68 Inc VAT: £72.81

300mm x 24+2Teeth - Raimann Multi Rip

300mm x 24+2Teeth - Raimann Multi Rip

KERF - 3.2mm BODY - 2.2mm TOOTH ANGLE - 22 deg pos TOOTH SPACING -39mm ..

£109.49 Inc VAT: £131.39

300mm x 24Teeth - Rip Saw For Wood

300mm x 24Teeth - Rip Saw For Wood

KERF - 3.2mm BODY - 2.2mm FRONT RAKE ANGLE - 22 degrees TOOTH SPACING - 39mm ..

£60.05 Inc VAT: £72.06

300mm x 30Teeth  - Thin Kerf (rip) For Wood

300mm x 30Teeth - Thin Kerf (rip) For Wood

Kerf = 2.4mm Body = 1.6mm Tooth angle = 22 deg Tooth spacing = 30mm A&n..

£72.42 Inc VAT: £86.90

300mm x 30Teeth - Rip Saw For Wood

300mm x 30Teeth - Rip Saw For Wood

KERF - 3.2mm BODY - 2.2mm FRONT RAKE ANGLE - 22 degrees TOOTH SPACING - 30mm ..

£62.47 Inc VAT: £74.96

300mm x 30Teeth - Triple chip positive for aluminium & plastics

300mm x 30Teeth - Triple chip positive for aluminium & plastics

Kerf = 3.2mm Body = 2.5mm Tooth angle = 27 deg positive Tooth spacing = 30mm ..

£123.81 Inc VAT: £148.57

300mm x 36Teeth - Rip Saw For Wood

300mm x 36Teeth - Rip Saw For Wood

KERF - 3.2mm BODY - 2.2mm FRONT RAKE ANGLE - 22 degrees TOOTH SPACING - 26mm ..

£65.15 Inc VAT: £78.18

300mm x 48Teeth  - Negative For Wood

300mm x 48Teeth - Negative For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = minus 5 deg Tooth spacing = 19mm..

£80.01 Inc VAT: £96.01

300mm x 48Teeth  - Thin Kerf For Wood & Plastics

300mm x 48Teeth - Thin Kerf For Wood & Plastics

Kerf = 2.4mm Body = 1.6mm Tooth angle = 22 deg Tooth spacing = 19mm A&n..

£81.74 Inc VAT: £98.09

300mm x 48Teeth  - Universal Rip & Cross Cut For Wood

300mm x 48Teeth - Universal Rip & Cross Cut For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = 10 deg pos Tooth spacing = 19mm A ge..

£74.69 Inc VAT: £89.63

300mm x 48Teeth  - Universal Rip & Cross Cut For Wood

300mm x 48Teeth - Universal Rip & Cross Cut For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = 22 deg pos Tooth spacing = 19mm A ge..

£78.29 Inc VAT: £93.95

300mm x 48Teeth - Extra Thin Kerf ~ For Wood & Plastics

300mm x 48Teeth - Extra Thin Kerf ~ For Wood & Plastics

KERF - 1.5mm MAX CUT THICKNESS - 44mm BODY RIM - .9mm BODY CENTRE - 1.9mm ..

£142.67 Inc VAT: £171.21

300mm x 48Teeth - Triple chip negative for aluminium & plastics

300mm x 48Teeth - Triple chip negative for aluminium & plastics

Kerf = 3.2mm Body = 2.5mm Tooth angle = minus 2 deg Tooth spacing = 19mm ..

£101.21 Inc VAT: £121.45

300mm x 48Teeth - Triple chip positive for aluminium & plastics

300mm x 48Teeth - Triple chip positive for aluminium & plastics

Kerf = 3.2mm Body = 2.5mm Tooth angle = 7 deg positive Tooth spacing = 19mm ..

£101.21 Inc VAT: £121.45

300mm x 60Teeth  - Cross Cut For Wood

300mm x 60Teeth - Cross Cut For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = 10 deg pos Tooth spacing = 16mm ..

£84.13 Inc VAT: £100.95

300mm x 60Teeth - Panel Saw 4.4mm kerf

300mm x 60Teeth - Panel Saw 4.4mm kerf

KERF - 4.4mm BODY - 3.2mm FRONT RAKE ANGLE - 15 degrees TOOTH SPACING - 16mm ..

£101.33 Inc VAT: £121.60

300mm x 60Teeth - Triple chip negative for aluminium & plastics

300mm x 60Teeth - Triple chip negative for aluminium & plastics

Kerf = 3.2mm Body = 2.5mm Tooth angle = minus 2 deg Tooth spacing = 16mm ..

£109.07 Inc VAT: £130.88

300mm x 60Teeth - Triple chip positive for aluminium & plastics

300mm x 60Teeth - Triple chip positive for aluminium & plastics

Kerf = 3.2mm Body = 2.5mm Tooth angle = 5 deg positive Tooth spacing = 16mm ..

£109.07 Inc VAT: £130.88

300mm x 60Teeth - Triple chip positive trim & cross cut for wood

300mm x 60Teeth - Triple chip positive trim & cross cut for wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = 10 deg pos Tooth spacing = 16mm ..

£84.13 Inc VAT: £100.95

300mm x 72Teeth  - Negative For Wood

300mm x 72Teeth - Negative For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = minus 5 deg Tooth spacing = 13mm..

£88.76 Inc VAT: £106.51

300mm x 72Teeth  - Triple Chip Negative For Wood

300mm x 72Teeth - Triple Chip Negative For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = minus 5 deg Tooth spacing = 13mm ..

£88.76 Inc VAT: £106.51

300mm x 72Teeth - Cross Cut For Wood

300mm x 72Teeth - Cross Cut For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = 8 deg pos Tooth spacing = 13mm ..

£85.22 Inc VAT: £102.26

300mm x 72Teeth - Panel Saw 4.4mm kerf

300mm x 72Teeth - Panel Saw 4.4mm kerf

KERF - 4.4mm BODY - 3.2mm FRONT RAKE ANGLE - 10 degrees TOOTH SPACING - 13mm ..

£116.13 Inc VAT: £139.36

300mm x 72Teeth - Triple chip negative for aluminium & plastics

300mm x 72Teeth - Triple chip negative for aluminium & plastics

Kerf = 3.2mm Body = 2.5mm Tooth angle = minus 2 deg Tooth spacing = 13mm ..

£109.07 Inc VAT: £130.88

300mm x 72Teeth - Triple chip positive for aluminium & plastics

300mm x 72Teeth - Triple chip positive for aluminium & plastics

Kerf = 3.2mm Body = 2.5mm Tooth angle = 5 deg positive Tooth spacing = 13mm ..

£109.07 Inc VAT: £130.88

300mm x 72Teeth - Triple chip positive trim & cross cut for wood

300mm x 72Teeth - Triple chip positive trim & cross cut for wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = 8 deg pos Tooth spacing = 13mm ..

£85.22 Inc VAT: £102.26

300mm x 96Teeth  - Cross Cut For Wood

300mm x 96Teeth - Cross Cut For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = 6 deg pos Tooth spacing = 10mm ..

£95.13 Inc VAT: £114.16

300mm x 96Teeth  - Negative For Wood

300mm x 96Teeth - Negative For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = minus 5 deg Tooth spacing = 10mm..

£99.69 Inc VAT: £119.63

300mm x 96Teeth  - Thin Kerf (Fine Cut) For Wood & Plastics

300mm x 96Teeth - Thin Kerf (Fine Cut) For Wood & Plastics

Kerf = 2.4mm Body = 1.6mm Tooth angle = 6 deg Tooth spacing = 10mm A fi..

£110.96 Inc VAT: £133.15

300mm x 96Teeth  - Thin Kerf (Fine Cut) Triple Chip For Wood & Plastics

300mm x 96Teeth - Thin Kerf (Fine Cut) Triple Chip For Wood & Plastics

Kerf = 2.4mm Body = 1.6mm Tooth angle = 6 deg Tooth spacing = 10mm A fi..

£110.96 Inc VAT: £133.15

300mm x 96Teeth  - Triple Chip Negative For Wood

300mm x 96Teeth - Triple Chip Negative For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = minus 5 deg Tooth spacing = 10mm ..

£99.69 Inc VAT: £119.63

300mm x 96Teeth - Extra Thin Kerf ~ For Wood & Plastics

300mm x 96Teeth - Extra Thin Kerf ~ For Wood & Plastics

KERF - 1.5mm MAX CUT THICKNESS - 44mm BODY RIM - .9mm BODY CENTRE - 1.9mm ..

£163.23 Inc VAT: £195.88

300mm x 96Teeth - For Tenoner Machine

300mm x 96Teeth - For Tenoner Machine

KERF - 3.5mm BODY - 2.5mm FRONT RAKE ANGLE - 6 degrees TOOTH SPACING - 10mm ..

£109.39 Inc VAT: £131.27

300mm x 96Teeth - Special style Positive for Corian & picture frames

300mm x 96Teeth - Special style Positive for Corian & picture frames

Kerf = 3.2mm Body = 2.2mm Tooth angle = 6 deg pos Tooth spacing = 10mm ..

£100.27 Inc VAT: £120.33

300mm x 96Teeth - Triple chip negative for aluminium & plastics

300mm x 96Teeth - Triple chip negative for aluminium & plastics

Kerf = 3.2mm Body = 2.5mm Tooth angle = minus 2 deg Tooth spacing = 10mm ..

£129.55 Inc VAT: £155.45

Showing 1 to 40 of 45 (2 Pages)