250mm





250mm x 100Teeth  - Thin Kerf (Extra Fine Cut) For Wood & Plastics

250mm x 100Teeth - Thin Kerf (Extra Fine Cut) For Wood & Plastics

Kerf = 2.4mm Body = 1.6mm Tooth angle = 6 deg Tooth spacing = 8mm A fin..

£133.42 Inc VAT: £160.10

250mm x 100Teeth  - Thin Kerf (Extra Fine Cut) Triple Chip For Wood & Plastics

250mm x 100Teeth - Thin Kerf (Extra Fine Cut) Triple Chip For Wood & Plastics

Kerf = 2.4mm Body = 1.6mm Tooth angle = 6 deg Tooth spacing = 8mm A fin..

£133.42 Inc VAT: £160.10

250mm x 100Teeth - Thin kerf for aluminium & plastics

250mm x 100Teeth - Thin kerf for aluminium & plastics

Kerf = 2.8mm Body = 1.8mm Tooth angle = minus 2 deg Tooth spacing = 8mm ..

£122.40 Inc VAT: £146.88

250mm x 126Teeth - Thin kerf (2.2mm) for aluminium & plastics

250mm x 126Teeth - Thin kerf (2.2mm) for aluminium & plastics

Kerf = 2.2mm Body = 1.5mm Tooth angle = minus 2 deg Tooth spacing = 6mm ..

£167.99 Inc VAT: £201.58

250mm x 126Teeth - Thin kerf (2.8mm) for aluminium & plastics

250mm x 126Teeth - Thin kerf (2.8mm) for aluminium & plastics

Kerf = 2.8mm Body = 1.8mm Tooth angle = minus 2 deg Tooth spacing = 6mm ..

£153.27 Inc VAT: £183.93

250mm x 16+2Teeth - Multi Rip With Wiper Slots

250mm x 16+2Teeth - Multi Rip With Wiper Slots

KERF - 3.2mm BODY - 2.2mm TOOTH ANGLE - 22 deg pos TOOTH SPACING - 46mm ..

£89.16 Inc VAT: £106.99

250mm x 20Teeth - Rip Saw For Wood

250mm x 20Teeth - Rip Saw For Wood

KERF - 3.2mm BODY - 2.2mm FRONT RAKE ANGLE - 22 degrees TOOTH SPACING - 39mm ..

£50.29 Inc VAT: £60.35

250mm x 24Teeth  - Thin Kerf (rip) For Wood

250mm x 24Teeth - Thin Kerf (rip) For Wood

Kerf = 2.4mm Body = 1.6mm Tooth angle = 22 deg Tooth spacing = 30mm A&n..

£61.42 Inc VAT: £73.71

250mm x 24Teeth - Rip Saw For Wood

250mm x 24Teeth - Rip Saw For Wood

KERF - 3.2mm BODY - 2.2mm FRONT RAKE ANGLE - 22 degrees TOOTH SPACING - 30mm ..

£54.46 Inc VAT: £65.35

250mm x 30Teeth - Negative For Wood

250mm x 30Teeth - Negative For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = minus 5 deg Tooth spacing = 26mm..

£56.67 Inc VAT: £68.00

250mm x 30Teeth - Rip Saw For Wood

250mm x 30Teeth - Rip Saw For Wood

KERF - 3.2mm BODY - 2.2mm FRONT RAKE ANGLE - 22 degrees TOOTH SPACING - 26mm ..

£56.67 Inc VAT: £68.00

250mm x 32Teeth - Radius Tip Saw For Urban

250mm x 32Teeth - Radius Tip Saw For Urban

KERF - 5.0mm BODY - 4.0mm FRONT RAKE ANGLE - 5 degrees negative TOOTH SPACING - 25..

£216.53 Inc VAT: £259.84

250mm x 32Teeth - Special Trim Saw For Haffner

250mm x 32Teeth - Special Trim Saw For Haffner

KERF - 5.0mm BODY - 4.0mm FRONT RAKE ANGLE - 2 degrees negative TOOTH SPACING - 22..

£216.53 Inc VAT: £259.84

250mm x 40Teeth  - Negative For Wood

250mm x 40Teeth - Negative For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = minus 5 deg Tooth spacing = 19mm..

£62.71 Inc VAT: £75.25

250mm x 40Teeth  - Thin Kerf For Wood & Plastics

250mm x 40Teeth - Thin Kerf For Wood & Plastics

Kerf = 2.4mm Body = 1.6mm Tooth angle = 22 deg Tooth spacing = 19mm A&n..

£72.42 Inc VAT: £86.90

250mm x 40Teeth  - Universal Rip & Cross Cut For Wood

250mm x 40Teeth - Universal Rip & Cross Cut For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = 10 deg pos Tooth spacing = 19mm A ge..

£60.46 Inc VAT: £72.55

250mm x 40Teeth  - Universal Rip & Cross Cut For Wood

250mm x 40Teeth - Universal Rip & Cross Cut For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = 22 deg pos Tooth spacing = 19mm A ge..

£63.53 Inc VAT: £76.23

250mm x 40Teeth - Extra Thin Kerf ~ For Wood & Plastics

250mm x 40Teeth - Extra Thin Kerf ~ For Wood & Plastics

KERF - 1.5mm MAX CUT THICKNESS - 37mm BODY RIM - .9mm BODY CENTRE - 1.9mm ..

£124.19 Inc VAT: £149.03

250mm x 40Teeth - Triple chip negative for aluminium & plastics

250mm x 40Teeth - Triple chip negative for aluminium & plastics

Kerf = 3.2mm Body = 2.4mm Tooth angle = minus 2 deg Tooth spacing = 19mm ..

£85.98 Inc VAT: £103.17

250mm x 40Teeth - Triple chip positive for aluminium & plastics

250mm x 40Teeth - Triple chip positive for aluminium & plastics

Kerf = 3.2mm Body = 2.4mm Tooth angle = 7 deg positive Tooth spacing = 19mm ..

£85.98 Inc VAT: £103.17

250mm x 48Teeth - Hollow Ground For Vertical Panel Saws

250mm x 48Teeth - Hollow Ground For Vertical Panel Saws

Kerf = 3.2mm Body = 2.2mm Tooth angle = 10 deg Tooth spacing = 16mm Hol..

£83.50 Inc VAT: £100.20

250mm x 50Teeth  - Cross Cut For Wood

250mm x 50Teeth - Cross Cut For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = 10 deg pos Tooth spacing = 16mm ..

£70.46 Inc VAT: £84.55

250mm x 50Teeth - Triple chip negative for aluminium & plastics

250mm x 50Teeth - Triple chip negative for aluminium & plastics

Kerf = 3.2mm Body = 2.4mm Tooth angle = minus 2 deg Tooth spacing = 16mm ..

£91.28 Inc VAT: £109.54

250mm x 50Teeth - Triple chip positive for aluminium & plastics

250mm x 50Teeth - Triple chip positive for aluminium & plastics

Kerf = 3.2mm Body = 2.4mm Tooth angle = 5 deg positive Tooth spacing = 16mm ..

£91.28 Inc VAT: £109.54

250mm x 54Teeth - Planer / Splitter Saw

250mm x 54Teeth - Planer / Splitter Saw

KERF - 3.5mm BODY - 2.4mm FRONT RAKE ANGLE - 22 / 17degrees vary TOOTH SPACING - 1..

£180.91 Inc VAT: £217.09

250mm x 60Teeth  - Negative For Wood

250mm x 60Teeth - Negative For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = minus 5 deg Tooth spacing = 13mm..

£73.49 Inc VAT: £88.19

250mm x 60Teeth  - Triple Chip Negative For Wood

250mm x 60Teeth - Triple Chip Negative For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = minus 5 deg Tooth spacing = 13mm ..

£73.49 Inc VAT: £88.19

250mm x 60Teeth - Cross Cut For Wood

250mm x 60Teeth - Cross Cut For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = 8 deg pos Tooth spacing = 13mm ..

£73.49 Inc VAT: £88.19

250mm x 60Teeth - Steel Cutting

250mm x 60Teeth - Steel Cutting

Kerf = 2.2mm Body = 1.8mm Tooth angle = 0 degMin speed = 800 RPM Max speed = ..

£92.39 Inc VAT: £110.87

250mm x 60Teeth - Triple chip negative for aluminium & plastics

250mm x 60Teeth - Triple chip negative for aluminium & plastics

Kerf = 3.2mm Body = 2.4mm Tooth angle = minus 2 deg Tooth spacing = 13mm ..

£91.28 Inc VAT: £109.54

250mm x 60Teeth - Triple chip positive for aluminium & plastics

250mm x 60Teeth - Triple chip positive for aluminium & plastics

Kerf = 3.2mm Body = 2.4mm Tooth angle = 5 deg positive Tooth spacing = 13mm ..

£91.28 Inc VAT: £109.54

250mm x 60Teeth - Triple chip positive trim & cross cut for wood

250mm x 60Teeth - Triple chip positive trim & cross cut for wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = 8 deg pos Tooth spacing = 13mm ..

£73.49 Inc VAT: £88.19

250mm x 80Teeth  - Cross Cut For Wood

250mm x 80Teeth - Cross Cut For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = 6 deg pos Tooth spacing = 10mm ..

£83.13 Inc VAT: £99.75

250mm x 80Teeth  - Negative For Wood

250mm x 80Teeth - Negative For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = minus 5 deg Tooth spacing = 10mm..

£83.13 Inc VAT: £99.75

250mm x 80Teeth  - Thin Kerf (Fine Cut) For Wood & Plastics

250mm x 80Teeth - Thin Kerf (Fine Cut) For Wood & Plastics

Kerf = 2.4mm Body = 1.6mm Tooth angle = 6 deg Tooth spacing = 10mm A fi..

£95.72 Inc VAT: £114.87

250mm x 80Teeth  - Thin Kerf (Fine Cut) Triple Chip For Wood & Plastics

250mm x 80Teeth - Thin Kerf (Fine Cut) Triple Chip For Wood & Plastics

Kerf = 2.4mm Body = 1.6mm Tooth angle = 6 deg Tooth spacing = 10mm A fi..

£95.72 Inc VAT: £114.87

250mm x 80Teeth  - Triple Chip Negative For Wood

250mm x 80Teeth - Triple Chip Negative For Wood

Kerf = 3.2mm Body = 2.2mm Tooth angle = minus 5 deg Tooth spacing = 10mm ..

£83.13 Inc VAT: £99.75

250mm x 80Teeth - Extra Thin Kerf ~ For Wood & Plastics

250mm x 80Teeth - Extra Thin Kerf ~ For Wood & Plastics

KERF - 1.5mm MAX CUT THICKNESS - 37mm BODY RIM - .9mm BODY CENTRE - 1.9mm ..

£142.42 Inc VAT: £170.90

250mm x 80Teeth - Special style Positive for Corian & picture frames

250mm x 80Teeth - Special style Positive for Corian & picture frames

Kerf = 3.2mm Body = 2.2mm Tooth angle = 6 deg pos Tooth spacing = 10mm ..

£86.53 Inc VAT: £103.83

250mm x 80Teeth - Stainless steel Cutting

250mm x 80Teeth - Stainless steel Cutting

Kerf = 2.2mm Body = 1.8mm Tooth angle = 10 deg positiveMin speed = 800 RPM Max spe..

£115.06 Inc VAT: £138.07

Showing 1 to 40 of 44 (2 Pages)