Rapid

Here are some popular choices for this machine manufacturer. This list is not exhaustive, there may be other sizes and tooth choices that will fit these machines. Please note that the saw blades listed here will not fit all models and customers must check for themselves the correct diameter for their machine and the correct tooth choice for the material to be cut. 


 95mm x 20Teeth - Angled Trim Saw For Window Sections

95mm x 20Teeth - Angled Trim Saw For Window Sections

KERF - 2.0mm BODY - 1.4mm FRONT RAKE ANGLE - 5 degrees negative TOOTH SPACING - 15..

£67.38 Inc VAT: £80.85

200mm x 100Teeth - Thin kerf for aluminium & plastics

200mm x 100Teeth - Thin kerf for aluminium & plastics

Kerf = 2.2mm Body = 1.4mm Tooth angle = minus 2 deg Tooth spacing = 6mm ..

£132.28 Inc VAT: £158.73

200mm x 64Teeth - Triple chip positive for aluminium & plastics

200mm x 64Teeth - Triple chip positive for aluminium & plastics

Kerf = 2.8mm Body = 2.0mm Tooth angle = 5 deg positive Tooth spacing = 10mm ..

£86.53 Inc VAT: £103.84

250mm x 126Teeth - Thin kerf (2.2mm) for aluminium & plastics

250mm x 126Teeth - Thin kerf (2.2mm) for aluminium & plastics

Kerf = 2.2mm Body = 1.5mm Tooth angle = minus 2 deg Tooth spacing = 6mm ..

£167.99 Inc VAT: £201.58

275mm x 84Teeth - Triple chip negative for aluminium & plastics

275mm x 84Teeth - Triple chip negative for aluminium & plastics

Kerf = 3.2mm Body = 2.4mm Tooth angle = minus 2 deg Tooth spacing = 10mm ..

£105.63 Inc VAT: £126.75

300mm x 96Teeth - Triple chip negative for aluminium & plastics

300mm x 96Teeth - Triple chip negative for aluminium & plastics

Kerf = 3.2mm Body = 2.5mm Tooth angle = minus 2 deg Tooth spacing = 10mm ..

£129.55 Inc VAT: £155.45

350mm x 108Teeth - Triple chip positive for aluminium & plastics

350mm x 108Teeth - Triple chip positive for aluminium & plastics

Kerf = 3.6mm Body = 2.8mm Tooth angle = 5 deg positive Tooth spacing = 10mm ..

£140.58 Inc VAT: £168.69

Showing 1 to 7 of 7 (1 Pages)